A Molecular Z-Scheme Artificial Photosynthetic System Under the Bias-Free Condition for CO2 Reduction Coupled with Two-electron Water Oxidation: Photocatalytic Production of CO/HCOOH and H2 O2.

Bio-inspired molecular-engineered systems have been extensively investigated for the half-reactions of H2 O oxidation or CO2 reduction with sacrificial electron donors/acceptors. However, there has yet to be reported a device for dye-sensitized molecular photoanodes coupled with molecular photocathodes in an aqueous solution without the use of sacrificial reagents. Herein, we will report the integration of SnIV - or AlIII -tetrapyridylporphyrin (SnTPyP or AlTPyP) decorated tin oxide particles (SnTPyP/SnO2 or AlTPyP/SnO2 ) photoanode with the dye-sensitized molecular photocathode on nickel oxide particles containing [Ru(diimine)3 ]2+ as the light-harvesting unit and [Ru(diimine)(CO)2 Cl2 ] as the catalyst unit covalently connected and fixed within poly-pyrrole layer (RuCAT-RuC2 -PolyPyr-PRu/NiO). The simultaneous irradiation of the two photoelectrodes with visible light resulted in H2 O2 on the anode and CO, HCOOH, and H2 on the cathode with high Faradaic efficiencies in purely aqueous conditions without any applied bias is the first example of artificial photosynthesis with only two-electron redox reactions.

Molecular Characteristics of Water-Insoluble Tin-Porphyrins for Designing the One-Photon-Induced Two-Electron Oxidation of Water in Artificial Photosynthesis.

Faced with the new stage of water oxidation by molecular catalysts (MCs) in artificial photosynthesis to overcome the bottle neck issue, the "Photon-flux density problem of sunlight," a two-electron oxidation process forming H2O2 in place of the conventional four-electron oxidation evolving O2 has attracted much attention. The molecular characteristics of tin(IV)-tetrapyridylporphyrin (SnTPyP), as one of the most promising MCs for the two-electron water oxidation, has been studied in detail. The protolytic equilibria among nine species of SnTPyP, with eight pKa values on the axial ligands' water molecules and peripheral pyridyl nitrogen atoms in both the ground and excited states, have been clarified through the measurements of UV-vis, fluorescence, 1H NMR, and dynamic fluorescence decay behaviour. The oxidation potentials in the Pourbaix diagram and spin densities by DFT calculation of the one-electron oxidized form of each nine species have predicted that the fully deprotonated species ([SnTPyP(O-)2]2-) and the singly deprotonated one ([SnTPyP(OH)(O-)]-) serve as the most favourable MCs for visible light-induced two-electron water oxidation when they are adsorbed on TiO2 for H2 formation or SnO2 for Z-scheme CO2 reduction in the molecular catalyst sensitized system of artificial photosynthesis.

Depolymerization of robust polyetheretherketone to regenerate monomer units using sulfur reagents.

Super engineering plastics, high-performance thermoplastic resins such as polyetheretherketone, and polyphenylene sulfide have been utilized in industries, owing to their high thermal stability and mechanical strength. However, their robustness hinders their depolymerization to produce monomers and low-weight molecules. Presently, chemical recycling for most super engineering plastics remains relatively unexplored. Herein, we report the depolymerization of insoluble polyetheretherketone using sulfur nucleophiles via carbon-oxygen bond cleavages to form benzophenone dithiolate and hydroquinone. Treatment with organic halides converted only the former products to afford various dithiofunctionalized benzophenones. The depolymerization proceeded as a solid-liquid reaction in the initial phase. Therefore, this method was not affected by the shape of polyetheretherketone, e.g., pellets or films. Moreover, this depolymerization method was applicable to carbon- or glass fiber-enforced polyetheretherketone material. The depolymerized product, dithiofunctionalized benzophenones, could be converted into diiodobenzophenone, which was applicable to the polymerization.

One-Pot Synthesis of Polymers Containing PC Bonds in the Main Chain.

Placement of phosphorus in the polymer main chain leads to organophosphorus polymers with potentially unique chemical and physical properties. Herein, it is demonstrated that the Abramov phosphonylation reaction can be extended to the synthesis of such polymers, by reacting di- or tricarbaldehydes with phosphinic acid (PA) in the presence of N,O-bis(trimethylsilyl)acetamide (BSA). This technique affords polymers with main chain PC bonds, wherein phosphorus (V), aromatic rings, and hydroxymethylene moieties are linked by bis(α-hydroxymethylene)phosphinic acid (BHMPA) units. The resulting polymers are water soluble, display resilience against acid- and base-catalyzed hydrolysis, and exhibit superior thermal stability with high char yield in air (≈83%) and nitrogen (≈76%) atmosphere.

Promotive Effect of Bicarbonate Ion on Two-Electron Water Oxidation to Form H2 O2 Catalyzed by Aluminum Porphyrins.

Two-electron water oxidation initiated by one-electron oxidation of aluminum porphyrins (AlTMPyP) is an alternative water oxidation to the conventional four-electron pathway and could help to avoid the bottleneck subject of photon-flux density in artificial photosynthesis. Here, a dramatic enhancement of the reactivity by bicarbonate ion in the two-electron water oxidation to form H2 O2 is reported. An addition of sodium carbonate (Na2 CO3 ) controlled both catalytic current and product selectivity of the two-electron water oxidation to enhance the activity of AlTMPyP at pH≈10-11. Controlled potential electrolysis experiments at different concentrations of Na2 CO3 (10-100 mm) showed that peroxide selectivity was improved up to approximately 73 % by the increase of [Na2 CO3 ] added to the system. The promotion of the reaction cycle was induced by an enhanced dynamic capturing of H2 O2 from the hydroperoxy complex of AlTMPyP through an attack of a bicarbonate ion. The detailed electrochemical studies and product selectivity indicated that the bicarbonate ion served as a good cofactor for producing H2 O2 from water. At stronger alkaline conditions (pH 12.5), however, a retardative effect of the addition of Na2 CO3 on the catalytic reactivity was observed.

One Electron-Initiated Two-Electron Oxidation of Water by Aluminum Porphyrins with Earth's Most Abundant Metal.

We report herein a new molecular catalyst for efficient water splitting, aluminum porphyrins (tetra-methylpyridiniumylporphyrinatealuminum: AlTMPyP), containing earth's most abundant metal as the central ion. One-electron oxidation of the aluminum porphyrin initiates the two-electron oxidation of water to form hydrogen peroxide as the primary reaction product with the lowest known overpotential (97 mV). The aluminum-peroxo complex was detected by a cold-spray ionization mass-spectrometry in high-resolution MS (HRMS) mode and the structure of the intermediate species was further confirmed using laser Raman spectroscopy, indicating the hydroperoxy complex of AlTMPyP to be the key intermediate in the reaction. The two-electron oxidation of water to form hydrogen peroxide was essentially quantitative, with a Faradaic efficiency of 99 %. The catalytic reaction was found to be highly efficient, with a turnover frequency up to ∼2×104  s-1 . A reaction mechanism is proposed involving oxygen-oxygen bond formation by the attack of a hydroxide ion on the oxyl-radical-like axial ligand oxygen atom in the one-electron-oxidized form of AlTMPyP(O- )2 , followed by a second electron transfer to the electrode.